Technical Parameters.CREE new XHP 50.2 with a lifespan of up to 50,000 hours.Maximum output 2920 lumens(ANSI FL-1 standard).Working Coltage:8.4V-12.6V DC.High efficiency constant current circuit and
Technical Parameters
.CREE new XHP 50.2 with a lifespan of up to 50,000 hours
.Maximum output 2920 lumens(ANSI FL-1 standard)
.Working Coltage:8.4V-12.6V DC
.High efficiency constant current circuit and output constant current
.Premium type III hard-anodized anti-abrasive finish
.Humanized side switch function, one button open or close the flashlight ( hidden strobe/ SOS/beacon moede)
.Intelligent memory function stores preferred brightness setting
.Bezel : stainless steel, Ergonomic grip with anti-roll design
.High performance aluminum orange peel reflector
.compatible battery:3*18650 Lithium batteries
.body color:black
.lens:toughened ultra-clear glass with an anti-reflective violet coating
.The battery rack is provided
.Size:168mm(length)*47.5mm(body)*64mm(head)
.Net weight:486g(without battery)
Accessories
Lanyard,spare o-ring,user manual(Not include the battery and charger)
Operration Instructions
Battery Installation
take out the battery rack ,install 3*18650 Lithium batteries,The copper pole is the positive pole,The spring is negative,then put the battery rack into body ,then press the switch.
Note:please install the batteries as instructed,incorrect batteries installation can cause unsuccessful work.
Please use the original battery, do not use different capacity battery.
Mode Selection
High-Middle-Low ,(hidden strobe/ SOS/beacon mode),Moonlight mode,locked mode
1.Single click the switch to turn the flashlight on/off
2.With the flashlight on,press and hold the switch toStart shift mode:high-middle-low,when release the switch to stay the The current mode,and outage will memorize the current mode.
3.Double click the switch quickly to access the hidden strobe mode,double click again to access SOS/beacon mode.
4.With the batteries installed,the flashlight is turn off,press and hold the switch to turn the flashlight to Moonlight mode
5.In Moonlight mode,double click the switch quickly 3 times to turn to locked mode,then double click the switch quickly 3 times again to unlocking,.in locked mode,press and hold the switch to turn on the flashlight,if release the switch will turn off.
Technical Parameters
.CREE new XHP 50.2 with a lifespan of up to 50,000 hours
.Maximum output 2920 lumens(ANSI FL-1 standard)
.Working Coltage:8.4V-12.6V DC
.High efficiency constant current circuit and output constant current
.Premium type III hard-anodized anti-abrasive finish
.Humanized side switch function, one button open or close the flashlight ( hidden strobe/ SOS/beacon moede)
.Intelligent memory function stores preferred brightness setting
.Bezel : stainless steel, Ergonomic grip with anti-roll design
.High performance aluminum orange peel reflector
.compatible battery:3*18650 Lithium batteries
.body color:black
.lens:toughened ultra-clear glass with an anti-reflective violet coating
.The battery rack is provided
.Size:168mm(length)*47.5mm(body)*64mm(head)
.Net weight:486g(without battery)
Accessories
Lanyard,spare o-ring,user manual(Not include the battery and charger)
Operration Instructions
Battery Installation
take out the battery rack ,install 3*18650 Lithium batteries,The copper pole is the positive pole,The spring is negative,then put the battery rack into body ,then press the switch.
Note:please install the batteries as instructed,incorrect batteries installation can cause unsuccessful work.
Please use the original battery, do not use different capacity battery.
Mode Selection
High-Middle-Low ,(hidden strobe/ SOS/beacon mode),Moonlight mode,locked mode
1.Single click the switch to turn the flashlight on/off
2.With the flashlight on,press and hold the switch toStart shift mode:high-middle-low,when release the switch to stay the The current mode,and outage will memorize the current mode.
3.Double click the switch quickly to access the hidden strobe mode,double click again to access SOS/beacon mode.
4.With the batteries installed,the flashlight is turn off,press and hold the switch to turn the flashlight to Moonlight mode
5.In Moonlight mode,double click the switch quickly 3 times to turn to locked mode,then double click the switch quickly 3 times again to unlocking,.in locked mode,press and hold the switch to turn on the flashlight,if release the switch will turn off.